30/60W MOPA Fiber Marking Machine

MOPA Fiber Laser Source marking color

$2,999.00$3,499.00

Product ID: 4423 SKU: N/A Category:

Product Description

A MOPA laser source is a great way to expand your marking capabilities and improve the quality of your marking results on certain plastics and metals. With a conventional fiber laser, markings on certain metals and plastics (especially if they are dark in color) can be less homogeneous and rich in contrast. The MOPA laser source is a great solution in these cases because it allows you to select pulse durations, which translates into a wider range of laser parameters and more marking options. As a result, the MOPA can mark plastics with higher-contrast and more legible results, mark (anodized) aluminum in black, and create reproducible colors on steel.

Advantages of MOPA lasers

Selectable pulse durations not only improve marking results on certain metals and plastics, but also provide more marking capabilities. With the MOPA laser, the pulse durations can be set to predefined values between 4 and 200 ns. Because it offers such a wide range of pulse durations, the MOPA is one of the most flexible lasers on the market. It can simulate the properties of conventional fiber lasers (relatively long pulses) and those of classical solid state lasers (relatively short pulses) such as Nd:YAG or Nd:YVO4 (vanadate). You can also produce qualitatively equivalent markings with the MOPA laser partially faster than with the conventional fiber laser.

Using short pulses and lower pulse energy heat the material less, and the area of the heat affected zone is reduced. This results in more advantages and possibilities for laser marking metals and plastics:

  • Less burning/melting in the edge area of metal engravings
  • Less heat development during annealing markings on metal, which leads to a better corrosion behavior
  • Controlled melting of plastics
  • Less foaming with plastics
  • More homogeneous and sometimes higher-contrast markings on some plastics

The advantages of the conventional fiber laser sources remain unchanged:

  • maintenance-free
  • long service life
  • air-cooled
  • cost-effective

SPECIFICATIONS:

Laser Type: JPT MOPA Fiber Lasers

Wavelength: 1064nm

Laser Pulse Frequency: 10-400Khz

Adjustable pulse width: 6-200ns

Average Laser Power: 30W/60W

Marking Speed: <7000MM/S
Repetition Precision: ±0.01MM Min.

Line Width: 0.01MM Min.

Character: 0.1MM

Cooling Mode: Air Cooling Graphic

Formats Supported: PLT. DST. AI. DXF. BMP. JPG.CAD. CDR. DWG

Power Source: AC 110/220V±10%, 50/60Hz

Working Temperature: 0-40 C

Working Humidity: below 75%(No condensation)

Working Environment: Clean; free of dust

Gross Power: 500W

Laser Generator Safety Class: IV

Laser Module Life: >100,000 hours

Rotary device(Optional)

Warranty: two years

APPLICATIONS:

Color marking on stainless steel • Titanium sheet • Black marking on anodised aluminium(iphone)

VIDEOS:

1 review for 30/60W MOPA Fiber Marking Machine

  1. Lesley Savage

    Amazing! Can “laser printing” many color on stainless steel, good tech. support.

Add a review

Your email address will not be published. Required fields are marked *